Loose Material Dryer Wool Scouring Machine with 24 chock plates

Loose Material Dryer Wool Scouring Machine with 24 chock plates

B061-A Loose Material Dryer

    This machine is suitable for wool, wool-washing process and other bulk fiber drying.

The main specifications:

Working way: continuous drying type

Output plate and outlet height: 1196.5mm

Width of output sheet: 1768mm

Output sheet size: 20.5 m²

Output speed: 0.137~0.92m/minutes

Cooling area: 138 m²

Steam working pressure: 4Kg/cm²

Heating method: Aluminum strips around the tube

Chamber temperature: first section: 65℃～70℃

              Second section: 102℃～104℃

              Third section: 104℃～108℃

(The above refers to the carbonization temperature, if used for simple drying temperature needed to lower a bit. )

After drying moisture: 10～13％

Fan speed: 1000 Rev/min

Upper fan air flow: ≈ 14900 m³/h

Lower fan air flow: ≈ 13700 m³/h

Transmission mode:

Curtain: individual motor variable frequency stepless speed v-belt, turbine gearbox and chain drive.

Shape size: L12775mm  W3450mm  H2635mm

productivity:  110 kg/h~350kg/h

Random supply parts:

1．   Motor:   2.2KW  380V  960 RPM           6 sets

             2.2KW 380V 960 RPM               1 set

2.   Reducer: 4M  speed radio: 1:5  power: 1.5KW   1 set

3． V-belt:  A type  1905(A75″)                2 pcs

machine structure:

The machine is delivered from the chassis fan, blinds, heaters and other combinations formed. Racks are for the channel, angle iron and other components, main room with side fit two parts, steel isolation, main room installation of supply air curtain Panel heater and insulation plate, side fit fan is installed, transmission, gearbox. In order to prevent heat loss, surrounded by walls with insulation, main room equipped with a door that can be opened to facilitate repairs, topped with 2 open the exhaust air, moist air out of the body, but interface has an active regulator in order to regulate discharges of moist air, and another rectangular hole to adjust the air flow.

Fan mounted to the right, 4 fans are upper, 2 are lower, fan centrifugal type impeller made of steel plate, the fans are managed by a separate motor.

In main indoor II side with angle Guide, above has continuous of conveying Board, each block conveying Board of surface has many neatly of small hole, II end with rolled child Board-like chain makes each block conveying Board coupling growth and wide of conveying curtain, it is by chain drive, another end of sprocket axis frame can regulation, makes conveying curtain has appropriate of tension, in side indoor with motor through deceleration box makes whole conveying curtain in angle guide Shang slowly mobile.

Heating system via the steam pipe into the steam heater, heater and 3 groups, arranged for 2 groups of upper, 1 lower part are choke trap.

Machine is equipped with 24 chock plates, its main role is to regulate under the circumstances inside the oven air blows hot air evenly to all layers.

Transportation Board change of speed is stepless transmission speed ratio changes, based on specific requirements could rotate speed control handwheel stepless transmission speed by the Transportation Board.

B033-183

Model B033-183 Wool Feeder

Use

This machine is used for feeding wool or cotton to opening and washing and drying.

Main specifications

1. Width:1830mm.
2. Weight: 2T.
3. Horizontal lattice: The distance between working side to ground is 643mm; Driving speed: 1.1~1.8m/min.
4. Tilted lattice: Horn height:32mm; Horn distance:32mm. Parallel arrange. Driving speed: 6.5~30.4m/min.
5. Evener harrow: Working sway: 161.5 order/min.
6. Stripper roller: Diameterφ487mm；rotational speed: 104~161.5m/min.
7. Driving method: Driven by individual motors with V-belt.
8. Power:3KW.
9. Dimensions:2645×2660×2720mm